兵人在线BBICN

 找回密码
 注册
搜索
☆ 三游酷玩 (17年老字号诚信模玩店)
★ 犹大模玩 - 【雕像专营形象店】
☆ 呼和浩特 呼市兵人HOBBY CASTLE
★ 香菜模玩(皮皮虾模玩店)
☆ 北京 Easytoys国贸旮旯玩具店
★ 广告位 -------------- 空缺中
☆ 广州 优之兵模 兵人专卖店
★ 广告位 -------------- 空缺中
★ 广州 专业兵模玩具店-【主营批发】
★ 广告位 -------------- 空缺中
★ PJ玩具铺仓储批发店- 【主营批发】
★ 广告位 -------------- 空缺中
☆ 武汉 藏影兵人沙龙
★ 广告位 -------------- 空缺中
☆ 天津 神秘博物馆 实体店
☆ 御车族-福州兵人模型店皇冠金牌店
查看: 20196|回复: 94

[转]国内模型高手教你做场景*房屋的制作*

[复制链接]
发表于 2004-3-26 21:59 | 显示全部楼层 |阅读模式
BBICN 上海旗舰淘宝店
(1):房子的框架原型模。(见图1)最方便的做法便是用胶板来做,画好设计图稿,按图裁好所需要的胶板(0.5mm的胶板就可以了,墙的厚度我一般都设定在0.5厘米左右),用模型胶水粘合即可。这一步的重点在于如何让脱模更加方便,我的方法是留一条作为墙厚度的胶板不粘合,而是用胶带稍做固定,脱模时可将这条拆掉,以它为起始轻轻掰开旁边的胶条,很容易就脱模了。(见图1附加图)模具里可以涂上一层薄薄的凡士林作为脱模剂。
<img src="attachments/dvbbs/200432621574259618.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
(2):模具都做好后仔细检查一遍没什么问题后就可以浇石膏了。石膏选用好一点的模型石膏,不然在后期加工中容易断裂。往模具中倒入石膏后抖动整个模具,把气泡抖出来,趁石膏未完全硬化,用刀片把多余的石膏刮除,平整的墙面就出现了。之后的工作就是等它干燥脱模,时间大概为一天左右。(见图2)
<img src="attachments/dvbbs/200432621584483702.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />(3)制作墙上的细节。实际中的墙面不可能是光滑完整的,所以增加残损的砖,脱落的石灰有助于提高模型的真实性。画出你需要露出的砖的大概位置,然后用铅笔画出砖,可以是一块块叠加的那种,也可以做不规则的,这可以参考一些历史资料。(见图3)用薄胶板来模拟墙上的石灰水泥是很好的材料,厚度可选用0.2mm的。这一步的效果最主要的是在沿刻好的砖而做的.石灰的脱落断裂感。我是用笔刀做出这种效果的。还有,要使墙更像真实的墙,就要做一些墙面上的损伤,还有毛糙的感觉,用电动工具和补土就能完成这些效果。可见,并非贵的东西才能做出好的效果。完成图见图4。
<img src="attachments/dvbbs/200432621591759074.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />




上一篇:高活动性G3素体改造!
下一篇:[贴图]二戰槍枝舊化 Kar-98
 楼主| 发表于 2004-3-26 22:05 | 显示全部楼层
<img src="attachments/dvbbs/20043262234831683.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:07 | 显示全部楼层
(4)参照历史图片,我们可以用AB塑型补土做出围在门窗周围的小砖,用胶板叠加起来可以做出窗台。从图5我们可以看出砖是如何做出来的,这时候只是刻出砖的大体形状,残损的效果要在补土硬化后再做出来。图5附加图1是做完门窗周围细节后的全图。图5附加图2就是硬化后用笔刀刻出的残损效果。相对的,在墙面上加上一些弹孔也能增加真实感。
<img src="attachments/dvbbs/20043262265286898.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
我要说一句 收起回复
发表于 2004-3-26 22:08 | 显示全部楼层
顶了再看!
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:09 | 显示全部楼层
<img src="attachments/dvbbs/20043262281554442.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />(4)参照历史图片,我们可以用AB塑型补土做出围在门窗周围的小砖,用胶板叠加起来可以做出窗台。从图5我们可以看出砖是如何做出来的,这时候只是刻出砖的大体形状,残损的效果要在补土硬化后再做出来。图5附加图1是做完门窗周围细节后的全图。图5附加图2就是硬化后用笔刀刻出的残损效果。相对的,在墙面上加上一些弹孔也能增加真实感。
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:10 | 显示全部楼层
PGM4   
  
  
  头衔:猪肉王子
  等级:-VIP玩家-
  文章:111
  积分:260
  门派:DIY兵人联盟
  注册:2003-8-25
         第4楼



顶了再看!

不许插嘴
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:11 | 显示全部楼层
<img src="attachments/dvbbs/20043262211476112.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622112848074.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
(5)把几个部件仔细检查一下就要组装了。组装最简单的方法就是用502来粘合,先少滴点502,稍作固定,看没什么问题后再从结合处渗多点胶水进去。为了展示房子在实际场景中的效果,我给它加了块三合板作为地面。而大家在粘好后不要直接就固定到场景中去,那样上色很不方便。(图6)
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:13 | 显示全部楼层
<img src="attachments/dvbbs/200432622123876509.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
拼合以后
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:22 | 显示全部楼层
(6)房子的上色:房子的上色和战车是一样的,先喷一遍底色(深色的,我用的是郡士的德国灰)(图7)然后喷基本色,再做流水产生的水痕,青苔、污渍等效果。这里就不再重复了。见(图8正、侧面)。
<img src="attachments/dvbbs/200432622144363644.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622155587657.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622164476762.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
(7)门窗:门窗是用薄木片做的。薄胶板(0.4mm)的也能用来做,但需要在胶板上刻一些纹理,来模仿木纹。门窗上的扣环等都是用装颜料的铝皮做的,突起的铆钉是用尖头的器物在铝皮反面压出来的。落水管是用同样的材料做的。<img src="attachments/dvbbs/200432622182076745.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622185153734.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
8)地板横梁:把细木条裁成合适的长度,用502胶水粘合。这个步骤没什么难度,只要把所有横梁都固定在同一水平面上就可以了。横梁要先上色,否则地板铺上去后,上色会有困难。<img src="attachments/dvbbs/200432622194186089.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622204547803.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622213914652.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
(9)地板:同样是用薄木片来做地板的,我把它排列成如图11的样子。粘合上依然用502,这样效率比较高。在地板断裂处做点参差不齐的断裂的地板,效果会很好。全都粘好后,让它干一段时间,再稍微打磨一下就可以上色了。(图12为整体铺完后的效果,图13为上色旧化后效果)
我要说一句 收起回复
 楼主| 发表于 2004-3-26 22:32 | 显示全部楼层
(10)屋顶:做屋顶我在这也没什么好说的,大家从图上就能看得很清楚了.要注意的是把断裂处做的自然点.(图14)
<img src="attachments/dvbbs/200432622242618096.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
(11)瓦片:我是用透明胶板来做瓦片的,之所以用透明胶板来在做是因为透明胶板上完色后,从屋顶内侧看能透出正面上的颜色,从而免去了内侧再上色的麻烦.胶板裁成1*0.7的小块,把两头磨圆了就可以了.还是用502来粘合,动作要快一点,否则粘好后很难在分开(图15)。上色方面和其他的上色是同理可得的。(图16)<img src="attachments/dvbbs/20043262225429970.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
(12)大家可以从这几张图中观察到房子的几个特写。(图17~图21)<img src="attachments/dvbbs/200432622255855362.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/20043262227238833.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/20043262228644342.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622282122824.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622291651680.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" /><img src="attachments/dvbbs/200432622315291651.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
我要说一句 收起回复
您需要登录后才可以回帖 登录 | 注册

本版积分规则

手机版|小黑屋|Archiver|bbs.bbicn.com ( 粤ICP备20066041号 )

GMT+8, 2024-3-29 15:11 , Processed in 0.144373 second(s), 25 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表